MW400-24P

400W, 24v, 6 Blades, Wind Turbine

Το προϊόν δεν
είναι πλέον διαθέσιμο
Τιμές χωρίς ΦΠΑ
Στοιχεία Προϊόντος
PID:1100
SKU:MW400-24P
Μονάδα:67×33×40cm, 17.69 Κιλά
Κιβώτιο 2pcs:65×33×40cm, 22.20 Κιλά
Επιστροφές
Επιστροφή:20 ημέρες
Πίστωση:40 ημέρες
Εγγύηση:12 μήνες
Περιεχόμενα Συσκευασίας:
1 x Wind Turbine main body
1 x Screw kit + tools
1 x Charge controller 24v
1 x Nose cone
6 x Blades
1 x Tail
1 x Tail Beam

The MW Series Wind Turbines from MacroWind Systems are lightweight at less than 8.5kg and are designed for ease of installation and long service life.

The generator is a very low cogging force design for better performance in light winds and is packaged in a fully sealed die cast anodized aluminum enclosure.

There are no brushes to wear out or cause electrical noise and the bearings are sealed so the system is maintenance free.

The blades are glass reinforced polypropylene for high strength, UV resistance and fatigue resistance.

The permanent magnets used are Neodymium Iron Boron (NdFeB) for higher power output.

The mounting is to the top of a 51mm (2”) OD standard pole. The mount system is a vibration isolation type to minimize vibrations being carried down the mounting pole.

The hardware used is stainless steel for corrosion protection.

Charge controller included.

Χαρακτηριστικά :

  • Wind Turbine startup wind speed of 2.1m/s (4.5mph)
  • Smooth and quiet running maintenance free sealed turbine
  • Sealed die cast aluminum housing for protection from harsh environments
  • Very light and compact
  • Easy Εγκατάσταση and Maintenance Free Operation
  • Electronic over-speed protection
  • Charges batteries from flat

Applications :

  • Battery Charging Applications
  • Surveillance Cameras
  • Wireless Base Stations
  • Electric Gate Openers, Electric Fences
  • Street Lamps and Signs
  • Remote Cabins and buildings
  • Boats, RV’s and static caravans
  • Security Systems

 

Προδιαγραφές:
Startup Wind Speed 2.1m/s (4.5mph)
Power Rating (12.5m/s) 250W
Max Power Output 400W
Voltage Output 24V
Rotor Diameter 1.12m (3.7ft)
Blade Material Glass reinforced polypropylene
Body Anodized Die Cast Aluminum
Weatherproofing IP65 and Salt Mist Corrosion Protected
Over-speed Protection Electronic
Survival Wind Speed 35m/s (78mph)
Protection Open Circuit, Short Circuit, High Wind
Mounting Pole Required 51mm (2”) OD
Weight 10.5kg (23lb)
Monthly Energy Production 60kWh @5.4m/s (12mph)


Οι πελάτες που αγόρασαν αυτό το προϊόν αγόρασαν επίσης
EZ-RSJ2NM, RP-SMA Θηλυκό / Jack σε N-Type Αρσενικό Προσαρμογέας
EZ-RSJ2NM, RP-SMA Θηλυκό / Jack σε N-Type Αρσενικό Προσαρμογέας
EN-100 Low Loss Cable - By the meter
EN-100 Low Loss Cable - By the meter
EZ-RPSMAB100, RP-SMA Bulkhead Crimp connector for 100, RG-174 series cable
EZ-RPSMAB100, RP-SMA Bulkhead Crimp connector for 100, RG-174 series cable
EZ-RPSMAB195, RP-SMA Bulkhead Crimp connector for 195, RG-58 series cable
EZ-RPSMAB195, RP-SMA Bulkhead Crimp connector for 195, RG-58 series cable
EN-195 Low Loss Cable - 100m Spool
EN-195 Low Loss Cable - 100m Spool
EZ-RPSMAP2NM, RP-SMA Αρσενικό/Plug σε N-Type Αρσενικό, μετατροπέας
EZ-RPSMAP2NM, RP-SMA Αρσενικό/Plug σε N-Type Αρσενικό, μετατροπέας
EZ-RPSMAP195, RP-SMA Male/Plug Crimp connector for 195, RG-58 series cable
EZ-RPSMAP195, RP-SMA Male/Plug Crimp connector for 195, RG-58 series cable
EZ-NM2NFRA, N-Type Αρσενικό σε N-Type Θηλυκό Γωνιακός Μετατροπέας
EZ-NM2NFRA, N-Type Αρσενικό σε N-Type Θηλυκό Γωνιακός Μετατροπέας
Καλάθι αγορών
Άδειο καλάθι
Κατασκευαστής
MacroWind
Ιστοσελίδα του MacroWind
Άλλα προϊόντα
Ειδοποιήσεις Περισσότερα
Θέλω να λαμβάνω ειδοποιήσεις για το προϊόν 400W, 24v, 6 Blades, Wind Turbine
Το αίτημά σας παραμένει ενεργό για 6 μήνες.
Στείλτε το σε φίλο
 
Δεχόμαστε
Διανομείς
Βραβεία
aerial.net e-volution awards

aerial.net ICAP strongest greek company 2010 award
O ιστότοπος χρησιμοποιεί cookies για να βελτιώσει τις υπηρεσίες του και να εξασφαλίσει την σωστή λειτουργία του. Αποδοχή