Το προϊόν δεν
είναι πλέον διαθέσιμο |
| Τιμές χωρίς ΦΠΑ |
|
|
| Στοιχεία Προϊόντος |
|---|
| PID: | 165 |
| SKU: | wrusb1a |
| Βάρος: | 30 g |
| Επιστροφές |
|---|
| Επιστροφή: | 20 ημέρες |
| Πίστωση: | 40 ημέρες |
| Εγγύηση: | 12 μήνες |
|
WRUSB.1A dual USB expansion kit
Description:
-
Compatible with WRAP.1C / 1D / 1E boards.
-
Some soldering required: install 5x2 pin header (supplied) on WRAP board.
-
Must install latest BIOS.
-
The 5V regulator on the WRAP board is limited to 100 mA.
-
USB power option 1: use WRAP on-board regulator, limited to 100 mA. This should be enough for USB flash keys,
and when using self-powered hubs.
-
USB power option 2: supply 5V to the WRUSB adapter, should disconnect 5V going to the WRAP board, or remove
the 78L05 regulator on the WRAP board.
-
USB power option 3: modify the WRAP board for 5V ONLY operation. Install 0 ohm resistors (supplied) in locations
R101 and R102. 5V DC must be supplied through the DC jack, Power over Ethernet not recommended.
-
The Geode SC1100 USB controller is USB 1.1.
-
This solution will not fit inside the PC Engines WRAP.1 enclosures.
-
Origin: Taiwan
|
