WRUSB.1A dual USB expansion kit

Description:

• Compatible with WRAP.1C / 1D / 1E boards.
• Some soldering required: install 5x2 pin header (supplied) on WRAP board.
• Must install latest BIOS.
• The 5V regulator on the WRAP board is limited to 100 mA.
• USB power option 1: use WRAP on-board regulator, limited to 100 mA. This should be enough for USB flash keys, 
  and when using self-powered hubs.
• USB power option 2: supply 5V to the WRUSB adapter, should disconnect 5V going to the WRAP board, or remove  
  the 78L05 regulator on the WRAP board.
• USB power option 3: modify the WRAP board for 5V ONLY operation. Install 0 ohm resistors (supplied) in locations 
  R101 and R102. 5V DC must be supplied through the DC jack, Power over Ethernet not recommended.
• The Geode SC1100 USB controller is USB 1.1.
• This solution will not fit inside the PC Engines WRAP.1 enclosures.
• Origin: Taiwan