The TL-WR543G 54M Wireless AP Client Router integrates 4-port Switch, Firewall, NAT-router and Wireless AP. Its design is dedicated to Small Office/Home Office (SOHO) wireless network solutions. The TL-WR543G 54M Wireless AP Client Router allows you to connect your network wirelessly better than ever, share the Internet access, files and fun, easily and securely.
The TL-WR543G 54M Wireless AP Client Router provides 2 operation modes for multi-user to access the Internet: AP Client Router mode and AP Router mode. In AP Client Router mode, you can access the Internet wirelessly with the support of a WISP. In AP Router mode, it can access the Internet via a Cable/DSL Modem.
In the most attentive wireless security, the TL-WR543G 54M Wireless AP Client Router provides multiple protection ways. In AP Router Mode, it can be set to turn off the wireless network name (SSID) broadcast so that only stations that have the SSID can be connected. The router provides wireless LAN 64/128/152-bit WEP encryption security, WPA/WPA2 and WPA-PSK/WPA2-PSK authentication, as well as TKIP/AES encryption security. It also supports VPN pass-through for sensitive data secure transmission.
The TL-WR543G 54M Wireless AP Client Router complies with IEEE 802.11g and IEEE 802.11b standards so that the data transmission rate is up to 54Mbps. It adopts 2x to 3x eXtended Range™ WLAN data transmission technology so that the transmission distance could be up to 855.36 meters (tested in China), which is 2-3 times of traditional IEEE 802.11g and IEEE 802.11b solutions. The transmission range is extended to 4-9 times. It is compatible with all IEEE 802.11g and IEEE 802.11b products.
The TL-WR543G 54M Wireless AP Client Router provides flexible access control in AP Router mode so that parents or network administrators can establish restricted access policies for children or staff. It has built-in NAT and DHCP server supporting static IP address distributing. It also supports Virtual Server and DMZ host for Port Triggering needs, and remote management and log so that network administrators can manage and monitor the network in real time.
The TL-WR543G 54M Wireless AP Client Router is easy-to-manage. Quick Setup is supported and friendly help messages are provided for every step. So you can configure it quickly and share the Internet access, files and fun.
|
Software Specification
|
|
Standards
|
IEEE 802.11g, IEEE 802.11b
|
|
Wireless Signal Rates
With Automatic Fallback
|
11g: 54/48/36/24/18/12/9/6M(dynamic)
11b: 11/5.5/2/1M(dynamic)
|
|
Frequency Range
|
2.4-2.4835GHz
|
|
Wireless Tx Power (MAX)
|
17dBm
|
|
Modulation Technology
|
DBPSK, DQPSK, CCK, OFDM, 16-QAM, 64-QAM
|
|
Receiver Sensitivity
|
54M: -68dBm@10% PER
11M: -85dBm@8% PER
6M: -88dBm@10% PER
1M: -90dBm@8% PER
|
|
Wireless Mode
|
AP Router Mode
AP Client Router Mode (WISP Clent)
Bridge mode (point-to-point / point to Multi-point)
|
| Wireless Range |
Indoors up to 200m, Outdoors up to 830m
|
| Wireless Security |
SSID Enable/Disable
MAC Address Filter
64/128/152-bit WEP Encryption
WPA/WPA2/WPA-PSK/WPA2-PSK
(AES/TKIP) Encryption
|
|
Hardware Specification
|
|
Interface
|
4 10/100M Auto-Sensing RJ45 Port(Auto MDI/MDIX)
1 10/100M Auto-Sensing RJ45 Port(Auto MDI/MDIX)
|
|
Antenna
|
3dBi Detachable Omni Directional Antenna (RP SMA Connector)
|
|
Power Supply Unit
|
Input: 100-240 AC
Output: 9VAC / 0.8A Switching PSU
|
|
Operating temperature
|
0°C~40°C (32℉~104℉)
|
|
Storage temperature
|
-40°C~70°C (-40℉~158℉)
|
|
Relative humidity
|
10% ~ 90%, Non Condensation
|
|
Storage Humidity
|
5%~95% Non-Condensing
|
|
Dimensions
|
6.9 x 4.4 x 1.2 in. (174 x 111 x 30 mm)
|
