The GD5WR29INF die cast grid antenna offered by e-zy.net is developed with 29dBi gain at the connector and a tight 6º beamwidth with excellent front to back and cross polarization characteristics.
The antenna grid is Aluminum Die Cast which is then powder coat painted for additional environmental protection.
Because of it's grid design the antenna offers excellent wind loading characteristics.
The antenna is constructed of 2 separate die cast aluminum pieces which are assembled together during installation. This leads to significant savings in shipping costs due to shipping size being much less than other types of similar gain antenna systems.
The GD5WR29INF comes complete with the Die Cast Grid, Feed-horn, and Mounting Bracket for up to 2inch diameter poles.
The Mounting Bracket gives up to ± 35o degrees of tilt angle and allows installation in either Vertical or Horizontal Polarization.
|
Προδιαγραφές: |
|
Freq. Range |
5150-5850 MHz |
|
Bandwidth |
700MHz |
|
Gain |
29 dBi |
|
V.S.W.R |
<1.5 |
|
Horizontal Beamwidth |
4º |
|
Vertical Beamwidth |
6º |
|
Max Power |
100 W |
|
Polarization |
Rotatable (Ver or Hor or 45o) |
|
Impedance |
50 ohm |
|
Connector |
N-Type Female (embedded in the feedhorn) |
|
Antenna Διαστάσεις |
600 x 900 mm |
|
Front to Back ratio |
>25dB |
|
Weight |
3.5 Kg |
|
Rated Wind Velocity |
60 m/s |
|
Feedhorn Material |
Aluminum, Plastic |
|
Grid Material |
Aluminum/Magnesium Die Cast |
|
Color |
Grey |
|
Mounting mast diameter |
Ø30 to 50mm |
