POE200 - Gigabit PoE Injector
The Cudy POE200 is a Gigabit Power over Ethernet (PoE) injector, supporting 802.3at/af standards with a maximum power output of 30W.
It enables data and power transmission over a single Ethernet cable for distances up to 100 meters.
|
|
GbE In, GbE Out |
|
|
100 m Transmission Distance |
|
|
802.3at/af, Max 30W, Mode A |
|
|
2-Pair 1/2- 3/6+ |
|
|
Power LED |
|
|
Surge/ESD Protection |
|
Specifications |
|
Model Version |
POE200 1.0 |
|
Protocols |
802.3i 10 Mbps over Twisted Pair, 802.3u 100 Mbps over Twisted Pair
802.3ab 1 Gbps over Twisted Pair, 802.3af PoE, 802.3at PoE |
|
Uplink Stream |
1× GbE |
|
Downlink Stream |
1× GbE, 802.3at/af |
|
Downlink Pin Assignment |
Mode A |
|
Transmission Distance |
100 meters at Gigabit (Cat. 5e or higher cable) |
|
LED |
Power |
|
Power Input Type |
AC Inlet |
|
Power Methods |
AC |
|
Power Input |
100-240V~ 50/60Hz |
|
Max Power Output |
30W |
|
Power Protection |
Surge Protection, ESD Protection, Overvoltage Protection, Short-Circuit Protection |
|
EMC |
IEC/EN 61000-4-2, Level 3 ESD: Contact: 6kV; Air: 8kV |
|
Grounding Methods |
Three-Prong Plug |
|
Ambient Operating Temperature |
-10~45 ℃ |
|
Storage Temperature |
-40~70 ℃ |
|
Operating Humidity |
10%~95% non-condensing |
|
Storage Humidity |
5%~95% non-condensing |
|
Certifications |
FCC, CE |
|
Mechanical |
|
Installation |
Desktop, Wall-mount |
|
Dimension |
121×50×36 mm |
|
Casing Material |
Plastic |
