wAP LR2 kit - Our newest out-of-the-box solution for LoRa® technology. Works with the 2.4 GHz frequency for LoRa®. Doesn’t interfere with the 2.4 GHz WLAN signal!
Like the previous wAP LR kits, it contains a pre-installed UDP packet forwarder to any public or private LoRa® servers and an outdoor weatherproof wireless access point with 2.4 GHz WLAN interface and Ethernet port with PoE-in that could be used as a backend.
Here’s the difference: this device works with the 2.4 GHz frequency for LoRa® as well. That means significantly higher bandwidth, higher data rate, and less air time. And because of the Chirp modulation technology, it doesn’t interfere with the 2.4 GHz WLAN signal!
A perfect solution for industrial setups with a high density of sensors.
There is a built-in 2 dBi WLAN / 4.7 dBi LoRa® antenna, but you can add an external antenna for extra coverage.
We suggest using the TOF-2400-8V-4 Omni antenna for best results.
|
Specifications |
|
Product code |
RBwAPR-2nD&R11e-LR2 |
|
Architecture |
MIPSBE |
|
CPU |
QCA9531 |
|
CPU core count |
1 |
|
CPU nominal frequency |
650 MHz |
|
RouterOS license |
4 |
|
Size of RAM |
64 MB |
|
Storage size |
16 MB |
|
Storage type |
FLASH |
|
Tested ambient temperature |
-40°C to 60°C |
|
Powering |
|
Number of DC inputs |
3 (Automotive, DC jack, PoE-IN) |
|
DC jack input Voltage |
9-30 V |
|
Automotive input Voltage |
9-30 V |
|
Max power consumption |
8 W |
|
Cooling type |
Passive |
|
PoE in |
Passive PoE |
|
PoE in input Voltage |
9-30 V |
|
Wireless specifications
|
|
Wireless 2.4 GHz Max data rate |
300 Mbit/s |
|
Wireless 2.4 GHz number of chains |
2 |
|
Wireless 2.4 GHz standards |
802.11b/g/n |
|
Antenna gain dBi for 2.4 GHz |
2 |
|
Wireless 2.4 GHz chip model |
QCA9531 |
|
Wireless 2.4 GHz generation |
Wi-Fi 4 |
|
Ethernet |
|
10/100 Ethernet ports |
1 |
|
Peripherals |
|
Number of SIM slots |
1 Modem (Mini SIM) |
|
MiniPCI-e slots |
1 |
